The Innuos Phoenix USB reclocker takes the USB signal from any source and completely regenerates it to an extremely high precision signal to feed into your DAC, allowing it to perform at its best. The Phoenix USB offers in one unit the equivalent of three separate components – a USB regenerator, a linear power supply and an external master clock with its own linear power supply.
- Ultra-precise OCXO 24 MHz clock
- Dual Statement-level linear power supplies
- Works with any USB audio source
- Works with any DAC equipped with a USB audio input
The USB chip regenerating the signal contains no switching regulators. All 3 independent voltages to the chip originate from an independent linear power supply with further regulation provided by 3 sets of LT3045 regulators.
The Innuos Phoenix USB reclocker uses a 3 PPB OCXO clock running at 24 MHz and connected via a board track just a couple of inches away from the USB chip. Therefore, no precision is lost within cables and connectors, as is the case when using an external master 10 MHz clock with an additional 24 MHz clock generator.
Phoenix USB features two independent Innuos Statement-level linear power supplies, one dedicated to the OCXO clock and the other used for powering the USB chip / 5V USB line.