Dynavector Aska-H Moving Coil Cartridge
Dynavector’s entry-level high output moving coil cartridge – runs straight into a standard MM phono input, no step-up transformer or MC phono stage required. Hand-built in Japan with the same design philosophy as Dynavector’s higher-end models: open, natural, and remarkably low in distortion.
Usually dispatched in 1-2 days. Delivery & returns
£449.00
including delivery and VAT
Have a question? Call us on 0161 399 0993 or contact us. We also offer part exchange and price matching.
About the Dynavector Aska-H
For nearly 50 years, Dynavector has pushed the boundaries of what a moving coil cartridge can do. The Aska-H takes everything learned from their flagship models – the open, natural, low-distortion character Dynavector is known for – and packages it into a high output cartridge that runs straight into a standard MM phono input, no step-up transformer or head amp required. For the low output version, built for owners of a dedicated MC phono stage or step-up transformer, see the Aska-L.
Built to Dynavector’s high-end standard, not scaled down from it
Every stage of production – moulding, cutting, heat treatment, plating, assembly, final adjustment – happens in Japan, hand-assembled and individually inspected. The Aska-H isn’t a budget simplification of the Dynavector formula; it’s the same standard of build applied to a more accessible cartridge.
High output, built for simplicity
Dynavector’s own coil-winding technology makes a genuinely high-output MC cartridge possible: many turns of ultra-fine wire around the coil bobbin retain a healthy 2.8mV output. That means you get the sonic character of a moving coil cartridge with the plug-and-play simplicity of a moving magnet.
- Output: 2.8mV
- Recommended load impedance: 1,000Ω or higher
- Connects to: any standard MM phono input (47kΩ load) – no transformer or head amp required
Best for: turntable owners with a standard MM-only phono stage who want to hear what MC sounds like without buying additional equipment.
Features
Cartridge design
Special Annealing Magnetic Circuit
Pure iron, precisely annealed for stable, low-distortion magnetic properties.
Neodymium magnet with Softened Magnetism
Reduces the harshness of a rare-earth magnet while keeping its output and drive.
Elliptical stylus
A well-balanced, forgiving profile that suits a wide range of tonearms and setups.
Threaded M2.5 mounting
Screw holes built directly into the body, no loose nut to hold in place while fitting.
Output & connection
High output coil winding
Ultra-fine wire, wound many times, retains a healthy 2.8mV output.
Direct MM phono compatibility
Runs straight into a standard 47kΩ MM input, no step-up transformer or head amp.
Specifications
| Brand | Dynavector |
|---|---|
| Type | High output MC, flux damper & softened magnetism |
| Output Voltage | 2.8mV (1kHz, 5cm/sec) |
| Channel Separation | 25dB (1kHz) |
| Channel Balance | 1.0dB (1kHz) |
| Frequency Response | 20Hz–20kHz (±2dB) |
| Compliance | 12mm/N |
| Tracking Force | 1.8–2.2g |
| Impedance | 150 ohms |
| Recommended Load Impedance | >1,000 ohms |
| Cantilever | 6mm hardened aluminium pipe |
| Stylus | Elliptical |
| Weight | 5.8g |
In the box
- Aska-H cartridge
- Mounting screws (M2.5)
- Instruction manual
- Warranty card